Zoomsoulblue Posted March 8, 2019 Share Posted March 8, 2019 Just a quick one 43 years since I brought this for a few quid - real or not, I understand that there were some good boots back in the day - to me it looks fine - but I guess am slightly bias - lol Link to comment Social source share More sharing options...
Steve Foran Posted March 8, 2019 Share Posted March 8, 2019 Not sure the run out groove looks too wide. It should have either Bell Sound or Nashville matrix also. 2 Link to comment Social source share More sharing options...
Guest Posted March 8, 2019 Share Posted March 8, 2019 As Steve has said that type of demo should have a Bell sound stamp and a raised 'X' in the dead wax Link to comment Social source share More sharing options...
Mixedangased Posted March 8, 2019 Share Posted March 8, 2019 Boot me thinks that run outs too wide & should have bell sound stamp, Link to comment Social source share More sharing options...
Soulstu Posted March 8, 2019 Share Posted March 8, 2019 (edited) deffo a pressing, sorry - I have an original and a pressing and the pressing has the same wide run out as yours. Edited March 8, 2019 by SoulStu 1 Link to comment Social source share More sharing options...
Only Dreaming Posted March 8, 2019 Share Posted March 8, 2019 (edited) You also need to check the delta number for year of manufacture. There's a good guide on Dave Flynn's Website. You'll need to look under Monarch Pressing Plant Disc Info: ://www.anorakscorner.com/PressingPlantInfo.html Dave Edited March 8, 2019 by Only Dreaming Link to comment Social source share More sharing options...
Strider Posted March 8, 2019 Share Posted March 8, 2019 Take a look at the first photo the Delta mark is followed by 10 something proving its a boot presume delta 100301 sorry mate Link to comment Social source share More sharing options...
Speedlimit Posted March 8, 2019 Share Posted March 8, 2019 Defo boot if it's styrene both originals I've had have been none styrene and bell sound stamp Link to comment Social source share More sharing options...
Blackpoolsoul Posted March 8, 2019 Share Posted March 8, 2019 Previous threads covered this well Link to comment Social source share More sharing options...
Zoomsoulblue Posted March 9, 2019 Author Share Posted March 9, 2019 Cheers guys no sweat cost me a few quid back inte 70ts thanks for taking the time to share knowledge- all good Link to comment Social source share More sharing options...
Chalky Posted March 9, 2019 Share Posted March 9, 2019 Its a styrene boot pressed at Monarch (MR in a circle) sometime after mid 1976. 1 Link to comment Social source share More sharing options...
Recommended Posts
Get involved with Soul Source
Add your comments now
Join Soul Source
A free & easy soul music affair!
Join Soul Source now!Log in to Soul Source
Jump right back in!
Log in now!