HI HOW DO YOU TELL THE DIFFERENCE BETWEEN ORIGINAL AND 70S PRESS

ON THE GREEN STEPHANYE LABEL

THANK YOU

Green-labelled vinyl press - moulded on label = bootleg = common

Green-labelled styrene press - stick on label = original issue = rare

HI IS THERE ANY MATRIX NUMBERS TO LOOK FOR IN RUN OUT

I have an original and it's got 

ztsc-107536 scratched in 

well that's what it looks like in my eyes lol 

 

Edited September 24, 20177 yr by natalie89

Original on the left boot on the right ... 

Both DEMO & Stock Copy have Identical Deadwax.
Both are on STYRENE and are Scratched - "ZTSC-107536"
With " T I " 180 degrees, scratched in the Deadwax.

Deadwax Width approx 14mm

I don't know if this will help further, but when you hold to the light
Exactly where the "6" is scratched there is a slight, but noticable dimple in the STYRENE.

Also a very Tiny Dot/Dimple Under the "C-" where the ZTSC-107536 is Scratched.




--------------------------------------------------------------------------------------------

------------* BOOT 70s Press *

------------* BOOT 70s Press *
The BOOT 70s Press is on Vinyl, Is a different shade of Green,
Scratched Matrix, and the DEADWAX Width is about 8mm.
The Vinyl is quite Pitted when held to the light.

The Boot has "ZTSC-103536" Scratched in the Deadwax.
Instead of "ZTSC-107536"

OK THANKS ITS A BOOT

 

 

 

 

Edited September 24, 20177 yr by detroit
WAS NOT RIGHT