CAN ANYONE TELL ME ABOUT THESE TWO DIFFERENT COPIES FIRST ONE IS ZTSC121053 STAMPED IN .

THE OTHER MW710 AND JM 1573 WITH WHAT I CAN ONLY DESCRIBE AS A CIRCLE WITH A STRAIGHT LINE WITH AN UPSIDE DOWN U THROUGH

THE MIDDLE OF THE CIRCLE OR YOU COULD CALL IT A HUMPED BACK BRIDGE SCRATCHED IN.

NOT RARE ENOUGH TO BE BOOTED SURELY,THE SECOND ONE IS HEAVIER TOO.

THANKS

KEV

Edited June 2, 201212 yr by kevinsoulman

Two versions as well but I can't rememberi what's what.

T'other is four chaps

Four Chaps is better

also done by johnny york on bev-mar

CAN ANYONE TELL ME ABOUT THESE TWO DIFFERENT COPIES FIRST ONE IS ZTSC121053 STAMPED IN .

THE OTHER MW710 AND JM 1573 WITH WHAT I CAN ONLY DESCRIBE AS A CIRCLE WITH A STRAIGHT LINE WITH AN UPSIDE DOWN U THROUGH

THE MIDDLE OF THE CIRCLE OR YOU COULD CALL IT A HUMPED BACK BRIDGE SCRATCHED IN.

NOT RARE ENOUGH TO BE BOOTED SURELY,THE SECOND ONE IS HEAVIER TOO.

THANKS

KEV

Both were pressed in chicago...the top one (styrene) was pressed by Columbia (ZTSC) whilst the lower (vinyl) one was pressed by Midwest Record Pressing Inc (MW---)...probably to satisfy demand two factories were used. Neither are bootlegs...neither rarer than the other in my experience.

Pressing Plant information on my site here: https://www.anorakscorner.com/PressingPlantInfo.html

Both were pressed in chicago...the top one (styrene) was pressed by Columbia (ZTSC) whilst the lower (vinyl) one was pressed by Midwest Record Pressing Inc (MW---)...probably to satisfy demand two factories were used. Neither are bootlegs...neither rarer than the other in my experience.

Pressing Plant information on my site here: https://www.anoraksco...gPlantInfo.html

THANKS A LOT FLYNNY

KEV