Hoping someone can steer me in the right direction with a perplexing, strange techie anomaly.

My Pioneer 600 will only play out of one side of the XLR Output. (LEFT) The RCA outputs are fine.

I have carried out all the usual faultfinding but to no avail.

So I bought another Pioneer 600 as a back up. Unit was MINT.  Set the new mixer up and hey presto... same issue! 

All Turntables, Speakers and cabling seem to be working fine! 

I'm at a loss as to what to try next so if anyone has had this type of issue before and can throw something into the mix I'd be grateful.

Cheers,

Dave 

 

 

Hi. Have changed speakers round? One could have fault 

have you changed cartridges one channel lead could be broken

Good luck Richard

leads,heads,wrong connection mind over matter ,master or gains numerous of issues need to see a vid ??

Been faultfinding for the best part of 4 hours now and STILL can't tie down the problem. ALL the components of the system seem to be working perfectly until you put them all together! The 2 Pioneer mixers display the same faults when in the set up but the system works perfectly with a Vestax mixer in it!

Will have another go once my head's cleared tomorrow before admitting defeat and having a pro look at it. 

Thanks for the input.

Cheers, 

Dave 

last from me stereo or mono ?? is there a switch to change 

Check on your amp to see if there is a switch for the cartridge type (MC, MM etc) and switch through the choices to check it has correct chanelling. Just a thought!

21 hours ago, Steviehay said:

last from me stereo or mono ?? is there a switch to change 

There is a mono/ stereo switch above the master level LEDS and a Master balance Left/ Right just above the Booth Monitor.

58 minutes ago, Spook said:

There is a mono/ stereo switch above the master level LEDS and a Master balance Left/ Right just above the Booth Monitor.

try switching it both ways