Following on from the thread in sales;-

Are we definetly saying that this was booted in the issue form?

I have creamy colour (flesh) label with red lettering - the deawax on the Where were you side has MS 3051 and a RP linked together with the other side MS3052 (but much smaller lettering than the other deadwax) and the RP (again much smaller than t'other side.

Can't feel owt under the label.

Boot or not?

Thanks

Julian

Following on from the thread in sales;-

Are we definetly saying that this was booted in the issue form?

I have creamy colour (flesh) label with red lettering - the deawax on the Where were you side has MS 3051 and a RP linked together with the other side MS3052 (but much smaller lettering than the other deadwax) and the RP (again much smaller than t'other side.

Can't feel owt under the label.

Boot or not?

Thanks

Julian

cream with red writing is a propper one....

cream with red writing is a propper one....

should have the stamp under the label too....

cream with red writing is a propper one....

i have a bootleg right here ....cream with red lettering...no stamps...BOOT BOOT BOOT !!!!....a rare boot no doubt but still a boot.....

cookie

i have a bootleg right here ....cream with red lettering...no stamps...BOOT BOOT BOOT !!!!....a rare boot no doubt but still a boot.....

cookie

any chance of a scan ??????/

i cant seem to erm post pics on ere cos im PC illiterate ...i can e-mail it to you if you PM me your addy

cookie

Following on from the thread in sales;-

Are we definetly saying that this was booted in the issue form?

I have creamy colour (flesh) label with red lettering - the deawax on the Where were you side has MS 3051 and a RP linked together with the other side MS3052 (but much smaller lettering than the other deadwax) and the RP (again much smaller than t'other side.

Can't feel owt under the label.

Boot or not?

Thanks

Julian

you don't even have to feel it Julian - you can see the stamp under the label. same as on Pat and the Blenders

I have a Mac and to upload a new photo or a scan I have to put into Iphoto then drag it to the desk top even if its a Jpeg.

Edited May 21, 200816 yr by Prophonics 2029

should have the stamp under the label too....

I have added this to "The Sharp End of Vinyl" Archive

The raised numbers, can be difficult to find,

should be on both sides, so look under either label.

I will attempt a scan of the Deadwax later.

Edited May 22, 200816 yr by 45cellar

I have added this to "The Sharp End of Vinyl" Archive

The raised numbers, can be difficult to find,

should be on both sides, so look under either label.

I will attempt a scan of the Deadwax later.

Hi Roger, great scans there. I asked on the other Epitome thread what the raised numbers or letters actually were? I have an issue and it's hard to see but looks something like "RIC" something, or is it "216" something?? have the same mark on Gail Anderson on "Be Proud" on Salvador! see someone mention Pat & Blenders... must dig that out an see what that's like

steve

Hi Roger, great scans there. I asked on the other Epitome thread what the raised numbers or letters actually were? I have an issue and it's hard to see but looks something like "RIC" something, or is it "216" something?? have the same mark on Gail Anderson on "Be Proud" on Salvador! see someone mention Pat & Blenders... must dig that out an see what that's like

steve

Thanks Steve

I managed the Image first time with the DEMO, numerous attempts with the Stock Copy and It's still difficult to see.

I think that it may be down to the paper used. You're right it is like "216" or something similar.

I have other records with this raised mark, I will have to search them out and have a look.

Thanks Steve

I managed the Image first time with the DEMO, numerous attempts with the Stock Copy and It's still difficult to see.

I think that it may be down to the paper used. You're right it is like "216" or something similar.

I have other records with this raised mark, I will have to search them out and have a look.

Roger..just dug out Pat & Blenders... on that disc the mark is quite clear and seem to be "1'2'1'CO"

steve

Roger..just dug out Pat & Blenders... on that disc the mark is quite clear and seem to be "1'2'1'CO"

steve

Steve

Thanks,

"1'2'1'CO"

I wonder if the same code is on all of the different releases.

Sam Moltrie "i'll allways love you" as stamp under the label.

Sam Moltrie "i'll allways love you" as stamp under the label.

theres loads of them ken, royal 5, empires, gene woodbury, frank beverley (gamble), spoke to john manship about these about a year ago & he said he'd been trying to find out where they were pressed, but he'd had no joy

M,S,I Co but its printed backwards, I will get a photo.

Oh this is on Bill Horton on Kayden

Virtu Music & Ninteen-Twenty Music Corp on the label

Edited May 22, 200816 yr by Prophonics 2029